Lionel
George is George Roberts who responds to support questions for HGSI. If you
are uncomfortable moving folders and editing setup files in HGSI it might be
easier to get a new install disk.
Charles
_____
From: quotes-plus-***@public.gmane.org [mailto:quotes-plus-***@public.gmane.org] On
Behalf Of Lionel Issen
Sent: Friday, August 17, 2007 12:38 PM
To: quotes-plus-***@public.gmane.org
Subject: RE: [quotes-plus] Conversion to QP3
Charles:
This shows that you surmised the problem. Thanks for this. Should I get a
new disk and reinstall everything?
Excuse my ignorance, but who is George?
Warm regards,
Lionel
From: quotes-plus@-yahoogroups.-com [mailto:quotes--plus-***@public.gmane.org]
On Behalf Of Charles Mattson
Sent: Friday, August 17, 2007 8:58 AM
To: quotes-plus@-yahoogroups.-com
Subject: RE: [quotes-plus] Conversion to QP3
Lionel,
The scan runs ok on my version of QP3 the following is a copy of the output
file
CVGW,2032500,-1113054.5
FEP,-29600,--150104.438
MTMD,12789900,-4037163.25
SLI,-2600,-100675.-555
SRS,6048500,-1443574.5
VLY PA,318200,52964.-4453
VTRU,1724000,-1206257.75
ZRBA,83800,28928.-8887
I think you should be able to edit the setup of HGSI to tell it the new
location of the Quotes Plus Data folder without reinstalling, but George can
better answer this. Also, any old excel spreadsheets will not run on the
new installation until you tell excel where the new data folder is by
modifying add ins links. I believe there is also a newer XLA excel add in
file in QP3 that should be referenced in excel. I believe the old XLA add
in is also included with QP3.
Charles
_____
From: quotes-plus@-yahoogroups.-com [mailto:quotes--plus-***@public.gmane.org]
On Behalf Of Lionel Issen
Sent: Thursday, August 16, 2007 11:40 PM
To: quotes-plus@-yahoogroups.-com
Subject: RE: [quotes-plus] Conversion to QP3
Charles:
I think that you may have identified the problem.
Where and how do I get a current version of the HGSI installation?
Another question, What is the current version of QP3?
Here is the code for the original OBV breakout scan. It selects about the
same tickers as a modified OBV scan that specifies the three exchanges.
Lionel
..
output = "obv1.lst";
integer j;
DaysToLoad = 200;
if ( obv(0) > Max( -1 , -130 , obv ) ) and
( close(0) > Max( -1 , -130 , cl ) ) then
println symbol , "," , obv(0) , "," , MovAvg( 0 , 90 , obv );
endif;
From: quotes-plus@-yahoogroups.-com [mailto:quotes--plus-***@public.gmane.org]
On Behalf Of Charles Mattson
Sent: Thursday, August 16, 2007 9:29 PM
To: quotes-plus@-yahoogroups.-com
Subject: RE: [quotes-plus] Conversion to QP3
I wonder if you have one of the older HGSI installations that installs the
Quotes Plus Data folder inside the Programs folder. I have changed to QP3
and all of my old scans run OK. Post a copy of a scan you can run in QP2
and I will try to run it on my QP3.
Charles
_____
From: quotes-plus@-yahoogroups.-com [mailto:quotes--plus-***@public.gmane.org]
On Behalf Of Lionel Issen
Sent: Thursday, August 16, 2007 9:09 PM
To: quotes-plus@-yahoogroups.-com
Subject: RE: [quotes-plus] Conversion to QP3
I dont mind converting to QP3 except there is nothing that I do in QP that
I can do in QP3. I need some sort of manual to tell me how to set up scans
and do everything else that I can do with QP. Right now my scans will not
run under QP3 as I get error messages and it hangs up. Nor do I know how to
set up scans in QP3.
If this is clarified I will stay with QP otherwise I will have to use
another data source.
Lionel
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.484 / Virus Database: 269.12.0/957 - Release Date: 8/16/2007
1:46 PM
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.484 / Virus Database: 269.12.0/957 - Release Date: 8/16/2007
1:46 PM
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.484 / Virus Database: 269.12.0/957 - Release Date: 8/16/2007
1:46 PM
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.484 / Virus Database: 269.12.0/957 - Release Date: 8/16/2007
1:46 PM